Industry Pain Points
- Electrostatic discharge (ESD) damaging sensitive components
- Unstable humidity affecting assembly yield
- Dry air increasing dust and particle contamination
- Frequent air exchange causing RH fluctuation
Why Humidity Control Matters
- Stable 45–55% RH helps reduce ESD risk and protects sensitive components.
- Consistent humidity improves process stability and reduces dust adhesion.
- Engineering-grade control avoids over-humidification and condensation risks.
Engineering Analysis Inputs
- Facility area (m²) and ceiling height
- Current RH and target RH
- Ventilation / exhaust conditions
- Door opening frequency
- Process or storage requirements
PHIMAXX Engineering Approach
- Define RH control requirement for ESD protection
- Recommend intelligent PM control for ±3% RH stability
- Design zoning for different assembly and testing areas
- Integrate central RH sensors or PLC if required
PM Series Model Mapping
| Workshop / Facility Size | Recommended PM Models | Control Mode | Engineering Notes |
|---|---|---|---|
| Small rooms & localized areas | PM-02 / PM-03 / PM-04 / PM-06 | Manual / Manual+Flexible | Easy retrofit, localized humidification |
| Medium production lines | PM-09MF / PM-09IF / PM-12MF / PM-12IF | Manual+Flexible / Intelligent+Flexible | Multi-unit zoning recommended |
| Large factories & warehouses | PM-15I → PM-30I | Intelligent Humidity Control | Centralized control, scalable layout |
Expected Results
- Reduced ESD risk and component damage
- Improved assembly yield and process stability
- Cleaner workshop environment
- Reliable 24/7 industrial operation
PHIMAXX engineering solution
- 1.7 MHz atomization for fine mist and stable output
- IP67 stainless housing for industrial environments
- Multiple protections: water shortage & over-temperature
- Control options: on/off control or optional external humidity controller / PLC input
- Water supply: piped or tank (model dependent)
- Designed for 24/7 factories and continuous duty applications
FAQ
Can it connect to PLC?
Yes. Optional external humidity controller / PLC input is available for integration.
What water quality is required?
Tap / RO / DI water supported (recommend filtration to reduce scaling and extend maintenance cycles).
Will the floor get wet?
With correct placement and airflow, mist evaporates quickly. We provide layout recommendations.
How to choose the right model?
Send your area, target RH, and water supply method. We recommend the right model within 24 hours.
Talk to PHIMAXX Engineers
Send your site conditions and we will provide a full engineering recommendation.
Need a recommendation for your application?
Share your industry, area size, target RH, and control requirement.