MS-08 Ultrasonic Mist Maker Module | OEM 1.7MHz IP67

8-Head Ultrasonic Mist Maker Module (MS-08)

MS Modules • OEM Integration • IP67 • CE • 1.7 MHz

4–5 L/h • DC 45V • 300 W • Field‑serviceable (replaceable mist discs)

Switch Model:← PrevNext →

Continuous Output

4-5 L/h

Input Voltage

DC 45V

Rated Power

300 W

Atomizing Heads

Product Images

MS-08 ultrasonic mist maker module photo

Working Video

Key Performance

System scale: Higher‑load zone / multi‑zone section
Distribution: 6–8 outlets (larger manifold)
Best fit when: outlet count and distribution uniformity are key constraints
Upgrade path: MS‑10/MS‑12 for larger manifolds and higher total demand

Where MS-08 fits best

Large manifolds (6–8 outlets)

Multiple nozzles / ducts

Warehouse aisle / section humidification

Defined areas / multi-outlet

Large grow facilities (section scale)

Section control / stable RH

Environmental chambers (higher load)

Test rooms / faster recovery

Tip: Need more outlets or faster RH ramp‑up for large spaces? Move to MS‑10 or MS‑12.

Parameter Specification

Model	MS-08
Continuous Output	4-5 L/h
Typical Output	0.4–0.6 L/h per head
Operating Frequency	1.7 MHz ±5%
Input Voltage	DC 45V
Power Consumption	300 W
Recommended Water Depth	8 cm
Typical Droplet Size (SMD)	≤ 10 μm
Output Stability	Stable for continuous operation
Waterproof Rating	IP67 (304 Stainless Steel Housing)
Continuous Duty Operation	Designed for continuous 24/7 operation
Ceramic Transducer Lifetime	3500 - 5000 hours (clean water conditions)
Certification	CE Certified (EMC & LVD compliant)
Dimensions (L×W×H)	237 x 85 x 28 mm
Typical Coverage Area	4-5 m²
Net Weight	2.35 kg

Integration Notes

Maintain the recommended water depth for stable atomization and consistent mist output.
Use clean water and include filtration to reduce scaling and extend transducer service life.
For manifolds/ducts: keep runs short where possible, avoid sharp bends, and balance branches for uniform delivery.
When designing multi‑outlet systems, specify target RH, airflow, tank size, outlet count, and duty hours—we can recommend the right model and layout.

Selection support: send tank size, water depth, airflow, target RH, outlet count, and duty hours — we’ll propose the right model and layout.

Download Datasheet

MS-08 Datasheet (PDF)

Optional glass-coated disc for special liquids

For weak acidic or weak alkaline solutions, this model can be configured with glass-coated ceramic atomizing discs. The option is used when the application needs better corrosion resistance than a standard ceramic disc.

Suitable examples include electrolyzed water, disinfection systems, agricultural nutrient solutions, and some industrial additive mixtures. Please confirm the liquid type and concentration before ordering.

Weak acid / weak alkaliOptional configuration for suitable low-corrosion liquids.

Better durabilityDesigned to reduce corrosion risk in approved liquid conditions.

Serviceable designThe atomizing disc can be replaced during maintenance.

Pre-check requiredNot suitable for strong acids, strong alkalis, oils, solvents, or unknown mixtures.

FAQ

What kind of water should we use?

Clean or filtered water is best. Hard water may work for short-term testing, but scale buildup can reduce output and shorten transducer life.

Can it run continuously?

Yes. The module is designed for continuous operation when the water depth, driver, cooling, and cleaning schedule are properly managed.

Do we need an external driver?

Yes. A matched external DC driver is required. We can provide it together with the module if needed.

What is the output per head?

Typical output is around 400–600 ml/h per head under stable voltage, clean water, and recommended water depth.

Can it work with weak acidic or alkaline solutions?

Yes, with the optional glass-coated ceramic atomizing disc. Please confirm the liquid type and concentration so we can check whether it is suitable.

Is maintenance complicated?

No. The atomizing disc is replaceable, so routine service does not require replacing the whole module.