Phimaxx ultrasonic mist maker modules
Home
MS Modules
MS Models
All MS ModulesMS-01MS-02MS-03MS-04MS-06MS-08MS-10MS-12
PM Humidifiers
PM Models
All PM ModelsPM-02MPM-03IFPM-03MPM-03MFPM-04MPM-06IFPM-06MPM-06MFPM-09IFPM-09MFPM-12IFPM-12MFPM-15IPM-18IPM-21IPM-24IPM-27IPM-30I
Waterproof Power SupplySolutionsAbout UsResourcesContact Us
10-Head Ultrasonic Mist Maker Module (MS-10)
MS Modules • OEM Integration • IP67 • CE • 1.7 MHz
5–6 L/h • DC 45V • 350 W • Field‑serviceable (replaceable mist discs)
Contact Us Email Sales Back to MS Selection
Switch Model:← PrevNext →
Continuous Output
5-6 L/h
Input Voltage
DC 45V
Rated Power
350 W
Atomizing Heads
10
Product Images
MS-10 ultrasonic mist maker module photo
Working Video

Key Performance

  • System scale: Large zone / engineered manifold
  • Distribution: 8–10 outlets (multi‑zone manifold)
  • Best fit when: higher total demand and many outlets must be served from one tank
  • Upgrade path: MS‑12 for maximum margin and expansion headroom

Where MS-10 fits best

Multi‑zone manifolds (8–10 outlets)
Many nozzles / one tank
Large production spaces (defined zones)
Higher-volume areas / multi-outlet
Large grow rooms (high demand)
Fast RH rise / long-run use
Industrial fog features (continuous)
High-duty OEM / fog systems
Tip: For maximum outlet count and the largest zones, step up to MS‑12.

Parameter Specification

ModelMS-10
Continuous Output5-6 L/h
Typical Output0.4–0.6 L/h per head
Operating Frequency1.7 MHz ±5%
Input VoltageDC 45V
Power Consumption350 W
Recommended Water Depth8 cm
Typical Droplet Size (SMD)≤ 10 μm
Output StabilityStable for continuous operation
Waterproof RatingIP67 (304 Stainless Steel Housing)
Continuous Duty OperationDesigned for continuous 24/7 operation
Ceramic Transducer Lifetime3500 - 5000 hours (clean water conditions)
CertificationCE Certified (EMC & LVD compliant)
Dimensions (L×W×H)279 x 85 x 28 mm
Typical Coverage Area5-6 m²
Net Weight2.5 kg

Integration Notes

  • Maintain the recommended water depth for stable atomization and consistent mist output.
  • Use clean water and include filtration to reduce scaling and extend transducer service life.
  • For manifolds/ducts: keep runs short where possible, avoid sharp bends, and balance branches for uniform delivery.
  • When designing multi‑outlet systems, specify target RH, airflow, tank size, outlet count, and duty hours—we can recommend the right model and layout.
Selection support: send tank size, water depth, airflow, target RH, outlet count, and duty hours — we’ll propose the right model and layout.
Download Datasheet
MS-10 Datasheet (PDF)

Optional glass-coated disc for special liquids

For weak acidic or weak alkaline solutions, this model can be configured with glass-coated ceramic atomizing discs. The option is used when the application needs better corrosion resistance than a standard ceramic disc.

Suitable examples include electrolyzed water, disinfection systems, agricultural nutrient solutions, and some industrial additive mixtures. Please confirm the liquid type and concentration before ordering.

Weak acid / weak alkaliOptional configuration for suitable low-corrosion liquids.
Better durabilityDesigned to reduce corrosion risk in approved liquid conditions.
Serviceable designThe atomizing disc can be replaced during maintenance.
Pre-check requiredNot suitable for strong acids, strong alkalis, oils, solvents, or unknown mixtures.

FAQ

What kind of water should we use?

Clean or filtered water is best. Hard water may work for short-term testing, but scale buildup can reduce output and shorten transducer life.

Can it run continuously?

Yes. The module is designed for continuous operation when the water depth, driver, cooling, and cleaning schedule are properly managed.

Do we need an external driver?

Yes. A matched external DC driver is required. We can provide it together with the module if needed.

What is the output per head?

Typical output is around 400–600 ml/h per head under stable voltage, clean water, and recommended water depth.

Can it work with weak acidic or alkaline solutions?

Yes, with the optional glass-coated ceramic atomizing disc. Please confirm the liquid type and concentration so we can check whether it is suitable.

Is maintenance complicated?

No. The atomizing disc is replaceable, so routine service does not require replacing the whole module.