MS-03 Ultrasonic Mist Maker Module | OEM 1.7MHz IP67

3-Head Ultrasonic Mist Maker Module (MS-03)

MS Modules • OEM Integration • IP67 • CE • 1.7 MHz

1.5–1.8 L/h • DC 36V • 120 W • Field‑serviceable (replaceable mist discs)

Mist Output

1.5–1.8 L/h

Input Voltage

DC 36V

Rated Power

120 W

Atomizing Heads

Product Images

Working Video

Key Performance

System scale: Small multi‑point coverage
Distribution: Up to 3 outlets / 3 mist points (short manifold)
Best fit when: you need better uniformity than MS‑02 without increasing tank size much
Upgrade path: MS‑04/06 for more outlets and higher total load

3‑point distribution in compact tanks

Three-point output / better spread

Small rack / shelving zones

Small shelves / narrow racks

Short manifold (3 outlets)

Three branches / short ducts

OEM chambers with multiple corners

Test boxes / enclosures

Tip: For higher total output or more outlets, move to MS‑04 (4‑head) and above.

Model	MS-03
Mist Output	1.5–1.8 L/h
Operating Frequency	1.7 MHz ±5%
Input Voltage	DC 36V
Power Consumption	120 W
Recommended Water Depth	6 cm
Atomized Droplet Size (SMD)	Typical ≤ 5 μm
Waterproof Rating	IP67 (304 Stainless Steel Housing)
Continuous Duty Operation	24 hours supported
Ceramic Transducer Lifetime	5000+ hours
Certification	CE Certified (EMC & LVD compliant)

Maintain the recommended water depth for stable atomization and consistent mist output.
Use clean water and include filtration to reduce scaling and extend transducer service life.
For manifolds/ducts: keep runs short where possible, avoid sharp bends, and balance branches for uniform delivery.
When designing multi‑outlet systems, specify target RH, airflow, tank size, outlet count, and duty hours—we can recommend the right model and layout.

Selection support: send tank size, water depth, airflow, target RH, outlet count, and duty hours — we’ll propose the right model and layout.