Module-based humidity control for cleanrooms, controlled production rooms, and hygiene-focused manufacturing areas.
MS modules are used in custom cleanroom humidification systems where fine mist, grouped output, and OEM integration are more practical than a standard off-the-shelf unit.
Tell us the room class, target RH, airflow condition, voltage, and control method for a practical module recommendation.
Suitable for clean production rooms that need stable RH and grouped humidity control.
Works for cabinet, duct, or AHU-side integration depending on the room layout.
Suitable for static-sensitive controlled rooms.
Fits clean cabinets and custom RH systems.
Easy to pair with RH sensors and PLC logic.
Add modules by room, zone, or AHU section.
Selection depends on target RH, room size, available power supply, and expected module quantity. Use this table as a quick starting point for inquiry discussion.
| Project type | Suggested models | Typical use |
|---|---|---|
| Small clean cabinets | MS-01 / MS-02 / MS-03 | Local clean benches and compact RH systems |
| Standard controlled rooms | MS-04 / MS-06 | General cleanroom humidity support |
| Grouped room projects | MS-08 / MS-10 | Larger clean zones or multi-room layouts |
Cleanroom humidity control must follow the facility's process specification, HVAC design and contamination-control requirements. Room classification alone is not enough to select an atomizing module. Air-change rate, temperature, pressure cascade and acceptable water quality must be reviewed with the cleanroom designer.
MS modules are components for qualified OEM equipment and air-handling systems. They are not a complete validated cleanroom solution by themselves.
The humidification section should prevent standing water, uncontrolled carryover and inaccessible surfaces. Sensor placement, staged capacity and interlocks with the air-handling unit are important for stable control. Materials and cleaning procedures must be reviewed for the specific pharmaceutical, laboratory or controlled-production application.
Send the HVAC conditions and project specification so we can confirm whether an MS module configuration is appropriate before quotation.